Description
This is special order item. The 40105N pump is available without the kit. The 40105N pump is available without the kit. ORDER IT HERE. If you still prefer the 40242N kit, it requires a minimum order of 30 and 45-90 days to produce.
The kit includes one 40105N fuel pump, mounting hardware, a 5/16" barbed outlet fitting, and a FEP735 74 micron inlet filter with a 5/16" hose barb.
CROSS REFERENCE
- Facet 40242, 40105, 40101, 480615
- Amida 660320
- Amsco FP1
- APSCO 152-107
- Ashdown 27-20595
- Atlantic Pacific EP42S
- Bobcat 6558398
- Case New Holland D72347
- EMPI 480615
- Federal Mogul P55468
- Lister Petter 000-01366
FEATURES
- For fuel volume requirements up to about 150 horsepower.
- Can also be combined in series or parallel to achieve any required pressure or flow.
- Low power requirements (about 1 amp at 12 volts), and seals or diaphragms are not required.
- The built-in pressure relief means no flooding after shutting down a hot engine.
- Compatible with gasoline, alcohol blends (up to and including E85), diesel, biodiesel, and fuel additives.
- Fuel can flow in either direction when the pump is turned off.
SPECIFICATIONS
- Voltage - 12 Volts
- Shut-Off Pressure (PSI) - 3.0 - 4.5
- Gallon Flow Per Hour (GPH) - 30
- Fitting Size - 1/8-27 Internal
- Minimum Dry Lift - 36 Inch / 91.44 cm
- Check Valve - No
- Positive Shut-Off Valve - No
- Positive Lead - N/A
- Negative Lead - 0.25 Inch Ring Terminal
- External Filter - Facet FEP735 or FEP43175 74U Filter
Beware unreliable foreign knock-offs. FuelPumper Facet fuel pumps are made in the USA.
