Description
The is the superseded pump with an external EMI filter. This is the only difference between it and the 477883F, which has an internal EMI filter.
CROSS REFERENCE
- Facet 477883E, 477883R7, X525-966, 477883N
- AM General MS-51321-1
- BAE (United Defense) MS51321-1
- Conelec 106091
- CNH L47856, L51730
- Die-a-Matic 9171017
- DRS Fermont MS51321-1
- Dresser Rand 607946121
- GM 14072370
- Grove/Kidde 7722001056
- Harsco (BMY) MS51321-1
- Hunter (HDT) 68428
- National Military MS51321-1-24N1, 2910-00-710-6054, 13238804, 7392887, M62678-1-24N1, MIL-P-45328, MIL-PRF-62678A
- Pierce EN15-15
- Unipart PRC1960
- Walbro 106091
FEATURES
- For fuel volume requirements up to about 200 horsepower.
- Can also be combined in series or parallel to achieve any required pressure or flow.
- Low power requirements (about 1 amp at 12 volts), and seals or diaphragms are not required.
- The built-in pressure relief means no flooding after shutting down a hot engine.
- Compatible with gasoline, alcohol blends (up to and including E85), diesel, biodiesel, and fuel additives.
- Fuel can flow in either direction when the pump is turned off.
SPECIFICATIONS
- Voltage - 24 Volts
- Shut-Off Pressure (PSI) - 4.0 - 5.0
- Gallon Flow Per Hour (GPH) - 32
- Fitting Size - 1/8-27 Internal
- Minimum Dry Lift - 24 Inch / 91.44 cm
- Check Valve - No
- Positive Shut-Off Valve - No
- Positive Lead - N/A
- Negative Lead - N/A
- Internal EMI Filter
- Internal Filter - Facet 479729 or FEP42370 74U Filter
Beware unreliable foreign knock-offs. FuelPumper Facet pumps are made in the USA.
